The Three Basic Services Offered by Lift Companies

Lift companies are an integral part of modern western society. With an accessory like the lift sufficiently ingrained in current public consciousness as to be un-dissociable from it, it is only natural that companies created to maintain and service these types of implements should be successful and widespread across the western world as well.

Services offered by, and requested from, lift companies usually revolve around one of three types of task. The lines below go into more detail about each of these types of services, and explain how each of them factors into the service life of the average lift.


Installation is the first step in the process of setting up a lift. This task is most commonly carried out in newly-built properties, or older properties being converted and modernised; this is because the blueprints for most modern buildings already included a lift, doing away with the need to install a second implement of this type.

Where the installation of a new lift is concerned, lift companies tend to come in when the project has already been cleared and all permissions acquired. The involvement of these types of companies mostly revolves around the actual execution stages, with lift installation professionals usually being in charge of taking measurements, erecting the scaffolding, setting up the beams, and finally, installing all the elements necessary to ensure proper lift functionality, such as the pulley system, the car itself, or the automated mechanisms meant to ensure passenger safety both before and after boarding the lift.

Lift installation is one of the most frequently requested services from lift companies, and an essential step in the construction of almost any modern building more than a few stories high.


As frequently requested as lift installation is, however, it is not the most common or commonly advertised service offered by specialist companies. Indeed, there is one other service most lift companies provide even more frequently: lift maintenance.

Lift maintenance is the bread and butter for most lift companies, for easily understood reasons: every device of this type, without exception, requires repair or maintenance at some point, and opportunities to repair a lift are far more common than chances to install one.

Furthermore, offering lift maintenance is an excellent way for lift companies to retain clients, as many property owners rightfully feel it is a good idea to hire the same company that installed a lift to provide maintenance for it. In other instances, property owners are dissatisfied with their current company, or somehow have the need to find a new provider for this service, so many lift companies also use this particular service as a way to acquire new customers, even without having performed any installations for them. These particularities cause lift maintenance to be seen by many lift companies as the main service to focus their business around and promote.


Modernisation is the third and final service most lift companies are frequently required to provide to both old and new customers. This service is most often provided in older properties, with outdated lift models which are no longer up to specifications or which may constitute a potential safety hazard.

Lift modernisation can be carried out in a number of different ways, from installing new security features to updating the mechanism itself or installing new parts meant to boost and improve the device’s performance. Most professionals employed by ethical lift companies will know how to assess which modernising features would best suit any given lift, and will be happy to advise property owners on how best to improve upon their existing device.

These are, of course, far from the only three services lift companies normally provide; they can, however, be said to be the three most popular ones, and the basis upon which most of these companies build their business.

Simple Ways to Reduce Erosion on Construction Sites

Among the main problems encountered during the cleanup of a construction site are filtering and sediment control issues. Construction projects produce twenty-two hundred tons per acres of erosion each year. It is an incredibly common concern for the construction industry, and it is important to know how to help prevent this event for the safety of the people around the construction site as well as the environment.

Erosion occurs due inclement weather and large bodies of water, which can cause soil & sludge to rapidly spread throughout construction sites. This is one of the leading sources of toxins, nutrients, and sediments that can pollute waterways and streams. Grading or altering undisturbed land increases the erosion rate, resulting in the construction industry generating millions of tons of sediments every single year. This is a huge risk that can result in bigger fines due to building violations.

Erosion prevention methods can be done by combining practices and having efficient construction products. Practices to control depend on the type of the construction activity as well as the site’s conditions – a grassy site with low inclines will need less care than a site with steep inclines and large exposed areas. One practice is to limit the amount of soil to be disturbed, helping to prevent runoff coming from the off-site areas flowing to the disturbed areas. Any sediment that is present in onsite runoff has to be removed before it leaves the site, and all state requirements should be met.

There are a lot of different products that can help control and prevent these issues from occurring in the first place. A variety of different inlet protection and sediment control products can and should be used in the construction site cleanup, such as curb inlet filters, sacks, and bags. These products are specifically designed to promote a healthier environment and keep the construction site safe, not only for the workers but the people around the site and who will later occupy it as well.

There are many different benefits of using quality cleanup products offered by reputable companies. These companies can offer products that help keep the site as clean as possible, as well as helping to keep the water quality from becoming polluted by sediment in the runoff. Performing these sediment control practices and using professional filters are part of the solutions that is now mandated by the government as well. Sediment and stormwater control solutions are designed to protect the grates and drains from stormwater runoff that is full of sediment and toxic, harmful material. Sediment and cleaning up construction zones has become a serious issue and can be addressed by taking the time to determine proper implementation and technology. Using these methods to help keep your runoff sediment free can help keep the area safe for people and wildlife while preventing costly fines.

Interior Post Construction Cleanup Tips

There is nothing worse than bringing contractors in to do a construction project only to find that once they have finished the job, they have left their mess behind. Construction site cleanup is part of the construction industry and it can be a messy job, but someone has to do it. You can make your life easier by cleaning as you go for starters, and that should help reduce the burden of the final cleanup to a degree. While it’s impossible to cover every aspect of a proper construction cleaning project, a good place to start would be to remove trash and debris on a daily basis, particularly wood and paint particles which can pose as dangerous fire hazards.

There are plenty of construction companies that might make use of a separate contractor to do the cleanup for them since it can save a lot of time and money by bringing in specialists (dependent on the size of the job). It is always wise to do a walk-through prior to the start of cleanup for the supervisor to find out exactly what the construction manager’s expectations are with regard to cleanup. This will also help to prevent a poor final product (when the project is completed).

So, what does construction site cleanup really entail? In general, any scuffs, hand and finger smudges, dust and dirt need to be wiped down off the walls and the same goes for trim, baseboards, windows, door frames and handrails. The ceilings will also need a good dust and the removal of any cobwebs that have sprung up. Doors need to be cleaned down- which may include the front, back, sides and the top, and don’t forget about the hinges. Any masonry will need to be vacuumed and cleaned as instructed. All of the carpeting throughout the project will need to be vacuumed as well. Wood, tile or marble should be buffed, waxed and sealed. You will need to clean the tracks, frames and glass on windows. Be sure to clean any of the light fixtures and ceiling fans dust tends to accumulate. Wall & ceiling vents, and floor vents will also be need to vacuumed, and in the case of floor vents they will need to be removed so that you can vacuum as deep as the attachments will allow. Electrical outlets and switches need cleaned since may they gather dust and hand smudges. That is just the basic cleaning inside, it doesn’t encompass the specific cleaning required in a bathroom, kitchen or the entry way. Not to mention any mirrors and cabinets throughout the house, as well as removing any of the manufacturer’s stickers that are not required.

On the topic of manufacturers, you should not forget the importance of which cleaning chemicals should and shouldn’t be used. Only cleaning products recommended by the manufacturer should be used, as the wrong chemical can cause irreparable damage and will set your project back as you have to replace any damaged items, especially things of delicate stonework like marble, granite and quartz. It is very likely that you will be unable to do all of the cleanup yourself, depending on the type of project its likely you will need to call in the professionals to finish off your flooring as it will require sealing and waxing. Now that the inside is taken care of you can begin focusing on cleaning up the outside.